High-altitude skydiving individual oxygen system 1.3L
Instructions for use:
1. One side is connected to the supply tube and has a one-way valve, which allows oxygen to enter the mask (100% pure oxygen) in one direction when inhaling and closes when exhaling.
2. There is an ambient air one-way inlet valve on one side, which allows ambient air to enter and mix with oxygen when inhaling. When the oxygen bottle is exhausted, it can also prevent suffocation. It has a spring breathing valve, which opens when exhaling and inhales. Close when inflated
Provides oxygen support for high-altitude skydiving during the skydiving stage. It is suitable for use at an altitude of 25,000 feet (7,620 meters). A variety of sizes are available.
The oxygen mask is ergonomic and made of silicone and PC composite materials. It is easy and comfortable to wear and fits the face. It can match the single-person helmet communication system and active helmets. The oxygen mask has a filter that can filter fine impurities in the gas to ensure breathing safety.
There is a knob-type oxygen flow regulator on the oxygen conduit, with 8 levels of flow adjustment, respectively 0, 1, 2, 3, 4, 5, 6 12lpm, which can stably output oxygen flow and adapt to the application needs of different heights.
Inlet air pressure
inlet pressure(bar)4 bar
peak inspiratory flow rate
Peak inspiratory flow rate (lpm) 120
Inspiratory resistance
Inhalation resistance(mm H2O) 25
expiratory resistance
Exhalation resistance(mm H2O) <10
Storage temperature range -55°C-+70°C
Operating temperature range -40°C to 50°C
Humidity range 0 to 100%, non-condensing
Altitude 25000 ft(7620m)
Oxygen tube length 1000mm
Oxygen storage capacity 200ml
Oxygen flow regulator: 8 levels of flow adjustment, respectively 0, 1, 2, 3, 4, 5, 6 and 12LPM
Interface Quick plug connector 1/8 inch